Jump to content
Light-O-Rama Forums

FS: CTB16D w/Cantex enclosure USB-RS485 Adapter w/booster


Recommended Posts

I have a CTB16D - 16 channel controller w/ high power heat sinks up for sale. I built this controller from a kit and it has been running my show for the past couple of years. It is wired for a 40 amp load (20 amps per side).

More info on the controller can be found here: http://store.lightorama.com/16chkitstwih1.html

It is enclosed in a Cantex 12x12 box, it has the short, heavy duty channel cords and the long (6ft.) power cords. The cords for the channels are numbered and use weatherproof connectors to attach to the enclosure. It also has two weatherproof ethernet connectors on the top of the box. The Hardware Utility reports it as having firmware version 4.32.

Also included is a USB-RS485 Adapter w/Booster.

I have all manuals and the driver CD for the USB-RS485.

Asking price is $250, plus actual shipping charges. I am located in Cincinnati, Ohio and will consider local pickup.







Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...