Guest guest Posted November 3, 2006 Share Posted November 3, 2006 Can some of you help me out and let me know how you hang your wreaths on windows? I have seen some ideas here such as buidling frames and putting them inside the frame but I have vinyl siding and need to figure the best way to secure these to the windows so they do not blow around too much and make noise at night as well as the obvious hang securely. I have 20 wreaths to hang that will sync to the channel on my controller and the zones they are placed in. Any help is much appreciated!Woolfman Link to comment Share on other sites More sharing options...
Guest guest Posted November 3, 2006 Share Posted November 3, 2006 For years we've used fishing line put through the two sashes and around the locking mechanism. Still using the same fishing line/wreaths 5 years later.They hang basically over the center of the lower sash that way.Moving Target in NCedited cause I can't spell Link to comment Share on other sites More sharing options...
Guest guest Posted November 3, 2006 Share Posted November 3, 2006 I bought some large suction cups that just stick to the window. I have used them for a few years with no problems. If you wreaths are real large, this method may not work. Link to comment Share on other sites More sharing options...
Guest guest Posted November 3, 2006 Share Posted November 3, 2006 Fishing line in the same way movtarget said. In an extremely heavy wind they may move slightly but never a problem. Link to comment Share on other sites More sharing options...
Recommended Posts