Dave Roche Posted January 18, 2011 Posted January 18, 2011 I've read through the index info in the sequencer, can't find how to run a single channel static throughout show. I know you need to do a 1:00 min animated sequence and delete a channel in the sequencer not sure what to do after that, any help would be great. Thanks Dave
bob Posted January 18, 2011 Posted January 18, 2011 Any sequence placed in the Background section of a show will automatically loop whenever it reaches its end, and will play throughout the entire show. So:(1) Make an animation sequence with that channel, and only that channel, in it. A minute long would be fine.(2) Turn that channel on for the entire length of that sequence.(3) Put that sequence in the Background section of your show.Note that you shouldn't have the same channel defined in any two sequences that could be playing simultaneously, or else they'll both try to control that channel, which will probably lead to undesired results. So, if that channel is in any of your "normal" sequences (such as those you intend to put in the Musical section of the show), remove it from them.
Recommended Posts