captainron19 Posted November 24, 2010 Share Posted November 24, 2010 Just powered my first two units up. Did a refresh and LOR found them, did a test on the units with lights everything worked fine.I restarted my laptop and when I went into the hardware utility the units are no longer visible at the top. I went into the console and did a test bringing all channels up to 100% power and they lit fine.My question is.... do I need to do a refresh of the units every time I restart the computer or should they be showing up? Link to comment Share on other sites More sharing options...
Mike Manzara Posted November 24, 2010 Share Posted November 24, 2010 I believe you need to refresh every time you go into the Hardware Utility. At least that is what I do. Link to comment Share on other sites More sharing options...
taybrynn Posted November 24, 2010 Share Posted November 24, 2010 Yes, you must refresh each time. You can change the max units parameter to say 10 or 20 (depending on your anticipated max controllers someday), then it's a lot faster on the detect. Link to comment Share on other sites More sharing options...
captainron19 Posted November 24, 2010 Author Share Posted November 24, 2010 ok - thanks... Dont know why I was panicking about that ... pre show jitters I guess Link to comment Share on other sites More sharing options...
Brad Bilger Posted November 24, 2010 Share Posted November 24, 2010 As one FireFighter to another, its NORMAL to expect something to screw up.. LOL.. Link to comment Share on other sites More sharing options...
captainron19 Posted November 25, 2010 Author Share Posted November 25, 2010 Brad Bilger wrote: As one FireFighter to another, its NORMAL to expect something to screw up.. LOL..I heard that! Hopefully not today - stuck working a 24 at the firehouse and hoping for no "Exploding Turkeys" Link to comment Share on other sites More sharing options...
Recommended Posts