sparky22 Posted November 19, 2010 Share Posted November 19, 2010 Hello, Were could I find the USB driver for the USB RS485 adapter?I am using windows 7Thanks Link to comment Share on other sites More sharing options...
LightORamaDan Posted November 19, 2010 Share Posted November 19, 2010 The one that came with it should work on Win7:To load the driver:Make sure all LOR program are stopped and shows are disabled.Unplug the USB adapter.Use this link to get the USB driver installer. Download it and save it to your Desktop:http://www.lightorama.com/downloads/CDM20600.exeOnce you have down loaded it and saved it to your desktop, double click the file which will run the driver installer. (make sure that the USB adapter is unplugged).Once the installer has completed,1 run the LOR hardware Utility.2 In the “Setup Comm Port” section (Top left of screen) click on the “Manual Select” dropdown.3 Make note of which comm ports are present.4 Plug in the USB adapter (wait 15 seconds for it to be recognized)5. Check the Manual Select dropdown and a new com port should now be present. Select that new comm port as your show port.Dan Link to comment Share on other sites More sharing options...
sparky22 Posted November 19, 2010 Author Share Posted November 19, 2010 Thanks Dan, Link to comment Share on other sites More sharing options...
Recommended Posts