cjackson Posted November 17, 2010 Posted November 17, 2010 i turn off all the 32 channels and shut down the computer but did not unplug the lor controllers from power. I had a mini tree one color stay on. I also noticed that when i tested the lights there was a spot on that was was on a difference controller. i was testing controller 2 and the spot was on 1. any help would be thankful.
cjackson Posted November 17, 2010 Author Posted November 17, 2010 just unplug or is there a reset button?
Brian Mitchell Posted November 17, 2010 Posted November 17, 2010 If the controller has dials, unplug, set to 00, plugin for 10 sec, unplug , return dials to proper setting.If no dials, unplug, pull the jumper off of the pins, plug in for 10 sec, unplug and replace the jumper to the same pins.
wallleyes Posted November 17, 2010 Posted November 17, 2010 You may also want to check your channel buttons and make sure you do not have a channel on controller 2 addressed as a circut 1.
Recommended Posts