Ponddude Posted October 18, 2010 Share Posted October 18, 2010 Alright, I think I should be thrilled about this added feature but I am a little confused about how to go about using it. Let me explain what I want to do...I have servos that are controlled via the ServoDog. I want to be able to have them revert back to their neutral position, which I configured in the ServoDog Utility. So, do I need to have the "Lights off at End" check or unchecked? Link to comment Share on other sites More sharing options...
LightORamaDan Posted October 18, 2010 Share Posted October 18, 2010 When the sequence editor does not turn lights off at end then when you stop play, it will not send an off command. That is all that the option does. There is no neutral at end command in the sequence editor.Now if during a show, you want the servos to return to neutral then at the end of each sequence add neutral values for all servo channels. Then when you build the show you would "un check" the turn lights off at end.Dan Link to comment Share on other sites More sharing options...
Ponddude Posted October 18, 2010 Author Share Posted October 18, 2010 Great...thanks Dan! Link to comment Share on other sites More sharing options...
Recommended Posts