Philip Posted May 8, 2010 Share Posted May 8, 2010 Is there a way to "Delete Extraneous Timings" from a selected area with a track instead of from the entire track? Link to comment Share on other sites More sharing options...
shfr26 Posted May 8, 2010 Share Posted May 8, 2010 I believe you can select the cells, right mouse click and pick delete timings. Link to comment Share on other sites More sharing options...
Don Posted May 8, 2010 Share Posted May 8, 2010 shfr26 wrote: I believe you can select the cells, right mouse click and pick delete timings.That would delete all the timings in the specified area, not the extraneous ones.Phillip, I took a quick look at the sequence editor, and I didn't see a way to do it, either. Link to comment Share on other sites More sharing options...
Philip Posted May 8, 2010 Author Share Posted May 8, 2010 that will delete ALL the timings within the selection, not the extra unused timings Link to comment Share on other sites More sharing options...
shfr26 Posted May 8, 2010 Share Posted May 8, 2010 Sorry, quess I did not understand the question correctly. My fault. Link to comment Share on other sites More sharing options...
Brian Mitchell Posted May 8, 2010 Share Posted May 8, 2010 Try this.create an extra channel. Do a little alternating on off on off at the start of the sequence. Copy and paste to end by cell. Then highlight the section you want to clear extra timings and turn that section off.This will use all the timings in the sequence except for the ones in the section you want to clear.Then Delete extraneous timings.Delete the spare channel.This should work. Let me know if it doesn't Link to comment Share on other sites More sharing options...
Recommended Posts