LightORamaJohn Posted July 7, 2009 Share Posted July 7, 2009 Please post corrections, comments and questions about the manual here. TNX.http://www.lightorama.com/Documents/CR150D_Man_Web.pdf Link to comment Share on other sites More sharing options...
LightORamaJohn Posted July 27, 2009 Author Share Posted July 27, 2009 Mostly complete Cosmic Color Ribbon manual. DMX support has been added to the controller and documented.http://www.lightorama.com/Documents/CR150D_Man_Web.pdf Link to comment Share on other sites More sharing options...
LightORamaJohn Posted October 2, 2009 Author Share Posted October 2, 2009 Manual that will be shipped with Cosmic Color Ribbon has been posted here: http://lightorama.com/Documents/CR150D_Man_Web.pdfWe will not be offering "cut kits" as these proved to be unusable/unreliable. It is still possible to cut the ribbon, but you must solder four wires between the cut pieces. Link to comment Share on other sites More sharing options...
WayneKremer Posted October 7, 2009 Share Posted October 7, 2009 Is it .3 Amp or 3 Amp? Page 15 says 3 Amp...whereas page 43 says .3 Amp. Thx! Link to comment Share on other sites More sharing options...
LightORamaJohn Posted October 7, 2009 Author Share Posted October 7, 2009 WayneKremer wrote: Is it .3 Amp or 3 Amp? Page 15 says 3 Amp...whereas page 43 says .3 Amp. Thx!The ribbon requires 3 amps at 12 volts DC. The power supply requires 0.3 amps at 120 volts AC to produce roughly 3 amps at 12 volts DC. Link to comment Share on other sites More sharing options...
WayneKremer Posted October 7, 2009 Share Posted October 7, 2009 Ah! OK, got it. That makes sense...thx! Link to comment Share on other sites More sharing options...
Recommended Posts