Squirrelcrusher Posted November 22, 2017 Share Posted November 22, 2017 I plugged in all my lights today and when I plugged in the controllers to power up the G3 the unit displays the time and then flashes to WAIT. I've checked the time, show start time and they are both correct. I moved the start time to 5 minutes ahead hoping it would start when it reached the start time, nope still just flashes the WAIT every few seconds. What am I doing wrong? I can't find the WAIT message in the G3 pdf manual. Link to comment Share on other sites More sharing options...
Gary Levelius Posted November 23, 2017 Share Posted November 23, 2017 The WAIT message means the show director is waiting for the start time programmed into your show that you placed on the SD card. Make sure you have your clock set properly. Pay attention to the LED in the lower right corner of the director display and have AM and PM set correctly. That LED dot will be ON for PM. Link to comment Share on other sites More sharing options...
Recommended Posts