tbuff23 Posted September 10, 2017 Share Posted September 10, 2017 I hook my controller it is a ( CB100D) I am not running it in DMX mode I am running a sequence I have all the bulbs set to red the first two strings everything is good the bulbs are red the last two strings are blue even though they are set for red. There is only one controller hooked up so there is no chance of having mixed up channels. Thanks in advance Link to comment Share on other sites More sharing options...
dibblejr Posted September 10, 2017 Share Posted September 10, 2017 Are you running bulbs or pixels? I had a similar situation running pixels and there is a color correction box that I didn't check. After reading manual I clicked the box and my test was fine. If you are running bulbs the box doesn't need to be checked. JR Link to comment Share on other sites More sharing options...
tbuff23 Posted September 10, 2017 Author Share Posted September 10, 2017 I am using bulbs Link to comment Share on other sites More sharing options...
dibblejr Posted September 10, 2017 Share Posted September 10, 2017 2 minutes ago, tbuff23 said: I am using bulbs Did you check to ensure the color correction is not on? JR Link to comment Share on other sites More sharing options...
tbuff23 Posted September 10, 2017 Author Share Posted September 10, 2017 YES I did it is not checked Link to comment Share on other sites More sharing options...
tbuff23 Posted September 10, 2017 Author Share Posted September 10, 2017 This shows up now What does it mean? Thanks Link to comment Share on other sites More sharing options...
dibblejr Posted September 10, 2017 Share Posted September 10, 2017 What is your intensity level set to? Link to comment Share on other sites More sharing options...
tbuff23 Posted September 10, 2017 Author Share Posted September 10, 2017 how do I check that? Link to comment Share on other sites More sharing options...
tbuff23 Posted September 10, 2017 Author Share Posted September 10, 2017 Start is 0 and end is 100% Link to comment Share on other sites More sharing options...
dibblejr Posted September 10, 2017 Share Posted September 10, 2017 I haven't done anything with my CB100D but I didn't have the problems you are having. Have you read the bulb guide? http://www1.lightorama.com/PDF/CosmicColorPixel_Man_Web.pdf Sorry not a whole lot of help but your original problem was similar. I purchased mine from a member here so not sure if he had set anything up with it, though it was listed as new and appeared to never been put together. Link to comment Share on other sites More sharing options...
tbuff23 Posted September 10, 2017 Author Share Posted September 10, 2017 Ok thanks Link to comment Share on other sites More sharing options...
Recommended Posts