Guest guest Posted August 8, 2006 Share Posted August 8, 2006 For my haunted attraction in halloween there will be 2 attendants that will hit play to start two seperate sequences. One for inside the barn when the train stops in the barn, the other for the lightning and thunder around the headless horseman.I need the attendants or workers to only be able to start and stop the sequences, I dont want them to be able to change them or do anything other than hit play and stop.Just had an idea while I was typing that could I set up a keyboard or mouse as hotkeys that would do it, with no monitor set up.Thanks Link to comment Share on other sites More sharing options...
Guest guest Posted August 8, 2006 Share Posted August 8, 2006 Why not just use them in standalone and have an on and off switch.glenn Link to comment Share on other sites More sharing options...
Guest guest Posted August 8, 2006 Share Posted August 8, 2006 Yeah I guess this will work, would not have to have computers. So Say I take a power strip plug the units into it, and have a 2 minute sequence. The train pulls in the switch is flipped the sequence runs and then stops after 2 minutes, and then the switch could be hit again for it to start again?So any time power is applied the sequence will start?Have got to be able to have music playing as well. Link to comment Share on other sites More sharing options...
Guest guest Posted August 8, 2006 Share Posted August 8, 2006 Logan,Use the PIR motion detector. It will work for what you need. Look under accessories in the LOR web site.James Link to comment Share on other sites More sharing options...
Recommended Posts