Don In Kenner-LA Posted September 13, 2009 Share Posted September 13, 2009 Hi everyone:Was wondering if any one has notice this iam using some of my home made sequences and some made by others. What I have notice that during some of the twinkle and shimmering my test lights do nothing I have leds and mini lights on different channels both act the same during some of the twinkle or shimmering parts they stay unlit any suggestions or do i have a defective unit just got it in aug.Thanks Don:{ Link to comment Share on other sites More sharing options...
-klb- Posted September 13, 2009 Share Posted September 13, 2009 I'd try resetting the card first. Turn the power off, set the unit ID to 00, turn the power on for about 10 seconds, and note the blink pattern on the LED. Then turn the unit off, and set the unit ID back to what it normally should be. See if this makes any difference for you.As a side note, the animation window is at best an approximation of shimmer and twinkle, but they should be very different effects when viewed on the controller. Link to comment Share on other sites More sharing options...
Recommended Posts