PaulXmas Posted September 11, 2013 Share Posted September 11, 2013 I am at work so I might be off on somethings but...The first year I had 32 channels and like everyone spent 1000's of hours programing.The next year I had a few more controllers and redesigned the yard and had everything set up in the SE.So now I wanted to use the squences from last year.In the SE there are tracks,I opened a musical sequence from last year noted what controled what (Channel 1 deer 1 and so one)In the the new squence I left the main track alone and copied everything to another track, track 2.I moved everything around in this track to match last years squence (screen shots would help).If last year Channel 1 controlled Deer 1 and this year Deer 1 is controlled by channel 6 on controller 10, then I would move channel 6 on controller 10 to the top spot.If last year Channel 2 controller Deer 2 and this year Deer2 is controlled by channel x on controller x then it would move into the second spot and so on. Then you can just copy last years track one to this years track two. Once you test and see everything works then save the config file and then open the next song load the config file copy and paste and save. Link to comment Share on other sites More sharing options...
Recommended Posts