mike2tall Posted November 5, 2012 Share Posted November 5, 2012 I know this has been covered before, but i cannot seem to come up with the answer by searching. This is a first for me with using RGB lights. I have LOR S3 Ver. 3.8 installed and have a couple of DMX RGBW flood lights hooked up. No problems with getting the lights to work, except for I have no red. I know that there has been discussion about channel shifting, but I thought this had been corrected. What I have is this, red is green, green is blue, and blue is white. There is no red output from the light. I do know that red works because it flashes red on startup.Have I setup something wrong or is there something else I need to do?Mike Link to comment Share on other sites More sharing options...
WayneKremer Posted November 8, 2012 Share Posted November 8, 2012 Open your RGB channel properties and verify that the DMX channel number for each color (per the DMX flood light documenation) is correct. Link to comment Share on other sites More sharing options...
Recommended Posts