Ralph D Posted November 16, 2011 Share Posted November 16, 2011 I have too new wire frames to put on my roof, and i forgot about needing a frame to mount it on. the frame i need to make is for the peek of my roof...very steep, i have no time to weld, so any ideas out there for making a peek mount wire frame holder? Link to comment Share on other sites More sharing options...
DownTown Posted November 16, 2011 Share Posted November 16, 2011 You could use guys to hold it in place. Run a line from each corner of your roof to the wireframe, and secure it tightly. I've done this with wireframes in the past.D.T. Link to comment Share on other sites More sharing options...
David Rise Posted November 16, 2011 Share Posted November 16, 2011 If you check out how The Holdmans put their star up. They used 2x4s and a couple of sandbags. Link to comment Share on other sites More sharing options...
jimswinder Posted November 16, 2011 Share Posted November 16, 2011 this is how I did my weber tree base on my peak...and here is a link to the Holdman Star and Base...http://www.holdman.com/christmas/star/ Attached files Link to comment Share on other sites More sharing options...
jimswinder Posted November 16, 2011 Share Posted November 16, 2011 and my Mega Tree...I then put sandbags over each of the 2 x 6's... Attached files Link to comment Share on other sites More sharing options...
David Rise Posted November 16, 2011 Share Posted November 16, 2011 Thanks Jim,I was just searching for that. Link to comment Share on other sites More sharing options...
Ralph D Posted November 16, 2011 Author Share Posted November 16, 2011 wow, these are great. but i need somthing much smaller, for a 4 foot tall wireframe. but this does spark ideas.any other ideas Link to comment Share on other sites More sharing options...
Linda McDonald Posted November 17, 2011 Share Posted November 17, 2011 Don't know where on your roof you need to mount them, but we've been using 3/4" sch 40 PVC pipe mounted to the frame. Then, we insert it into a flag pole bracket mounted onto the fascia along the roof lines. Link to comment Share on other sites More sharing options...
Recommended Posts