work=nofun Posted November 11, 2009 Share Posted November 11, 2009 Must be tired or something but setting up and testing tonight and 1 channel will stay on all the time, even if a sequence is not running.out of curiosity I switched controllers, and it still does it on that exact same channel (light) even on different controllers....:?Am I missing something or am I just that tired:D Link to comment Share on other sites More sharing options...
Brian Mitchell Posted November 11, 2009 Share Posted November 11, 2009 Try performing resets on the other controllers in the network. Sometimes a controller needing a reset will cause troubles on other controllers while seeming fine on its own. Link to comment Share on other sites More sharing options...
-klb- Posted November 11, 2009 Share Posted November 11, 2009 It almost sounds like it is unrelated to the controller. I think there have been odd issues with shorts in the past that caused similar issues. Link to comment Share on other sites More sharing options...
work=nofun Posted November 11, 2009 Author Share Posted November 11, 2009 I am almost wondering if I have a bad cable running to the controllerI will try a reset in the morning then switch over to my 2nd pc Link to comment Share on other sites More sharing options...
Recommended Posts