Jump to content
Light-O-Rama Forums

CCR red leds flash right after clicking play...

Gerald Corey

Recommended Posts

You are probably setting a macro effect and turning on the red LEDs at the same time in your sequence. Because the order in which commands are sent to controller cannot be predicted, the red turn on is happening before the macro effect gets to the controller. LEDs have such a fast turn on that you can see the distance between these two commands.

If this is what's happening, set the macro effect a little before turning on red.

If you are not manipulating the CCR at the start of you sequence, check your channel assignments and controller assignments to be sure there is no unexpected overlap.

Link to comment
Share on other sites

  • The topic was locked
This topic is now closed to further replies.
  • Create New...