chuckd Posted December 12, 2009 Share Posted December 12, 2009 Does anyone here know the outside diameter of their LOR 1602 boxes main power cables (the two main power cables)?Rather, can somebody measure it with a micrometer or caliper and let me know what it is? Make sure it's the main power cables, and not the individual 16 channel cables, since they are smaller.I'm trying to clamp on some TDK snap-on EMI filters to try to attack my house DSL problem, and I need to size the filter properly.Thanks!Chuck Link to comment Share on other sites More sharing options...
rwertz Posted December 12, 2009 Share Posted December 12, 2009 My (non-dial) calipers place them at ~ 0.365". I double checked the caliper setting on a 3/8" bit (which was slightly larger than the input cord).They are definitely larger than the output cables. Link to comment Share on other sites More sharing options...
Recommended Posts