Tim Posted December 10, 2009 Share Posted December 10, 2009 We put up a mega tree this year using 60 strings of 50 count LED in my neighbors yard. They tell me that about 4-5 hours after the show concludes those lights blink for a few seconds and then shut off. It's just this one tree that does this. The controller for this tree is the receiving end for our ELLs. Does anyone have any idea whey these lights come on with no show going?? Thanks!Tim Link to comment Share on other sites More sharing options...
Dennis Cherry Posted December 10, 2009 Share Posted December 10, 2009 Tim wrote: We put up a mega tree this year using 60 strings of 50 count LED in my neighbors yard. They tell me that about 4-5 hours after the show concludes those lights blink for a few seconds and then shut off. It's just this one tree that does this. The controller for this tree is the receiving end for our ELLs. Does anyone have any idea whey these lights come on with no show going?? Thanks!TimIt might or might not be any fault of the system.It could be something interfering with the ELL signal. Might look for a pattern in time when this happens.This could be a hard one to figure out if it is interference. Anything in the neighborhood could be the problem.Might try disconnecting the last ELL and see if it happens again. You said 4-5 hours, see if it is predictable to the minute.Just some thoughts. Link to comment Share on other sites More sharing options...
Recommended Posts