csenske Posted December 7, 2009 Share Posted December 7, 2009 I have tried several different times to create a new show using the Hardware Utility MP3 tab and adding the optional settime.cfg. The first time I did the card inserted and show started on time. Made some show changes and because had powered down the controller, tried to create a new card also with settime.cfg. Show did not start on time setting and we have reverted to using a 24/7 program temporarily until it can be sorted out.Any recomendations? Using 256mb, 1gb, 2gb and 4 gb SD cards. Tried using a couple different laptops to create card.Going to try once more . . . yes I am insane! Aren't we all? Link to comment Share on other sites More sharing options...
csenske Posted December 9, 2009 Author Share Posted December 9, 2009 I learned one tip. You can't just stick a new sd card into the 1602MP3 and have it recognize a new card. The entire box needs to be powered down (power supply removed) and then powered back up. Once that was done a new 24/7 program that works whenever powered initiated and started the show. Tomorrow I will try the process with a card that has a clock file and set time start / end time on it. If it works I will let you know. Link to comment Share on other sites More sharing options...
Recommended Posts