lightlight Posted December 4, 2009 Share Posted December 4, 2009 What is the best procedure for stopping or interrupting a running show when it rains? I know I can go into Hardware Utility and Disable Shows but when I do this some of my 128 channels still stay on.Thanks in advance. SG Link to comment Share on other sites More sharing options...
Frank A. Posted December 4, 2009 Share Posted December 4, 2009 Good morningthe only other way i can think of ending a showis to change the end time in the schedulerI have not tried this so I am making a guess thatthis is can be accomplishedFrank A. Link to comment Share on other sites More sharing options...
iresq Posted December 4, 2009 Share Posted December 4, 2009 Disabling from the control panel is the only way I know. If you have lights left on, you could always clear them from the hardware utility. This could be a pain if you have multiple controllers. Link to comment Share on other sites More sharing options...
Tim Fischer Posted December 4, 2009 Share Posted December 4, 2009 Yes, to end a show "gracefully", go in the scheduler and set the stop time to before the current time. (There should be a better way -- feature request?? ) The currently-running sequence will be allowed to finish, then any shutdown sequences will play and the show will stop.In the past, disabling shows would shut off all the lights connected to LOR controllers (but not X-10). Recent changes seem to keep lights on with LOR controllers as well. Link to comment Share on other sites More sharing options...
Recommended Posts