ukoberon Posted November 27, 2009 Share Posted November 27, 2009 So finaly went live today after 4 solid days of fixing up lights. All is weel except 1 board which has a problem with channels 14,15 and 16 which stay on all the time.Tried resetting the boards by powering off, removing the link powering on, then powering off replacing the link and repowering but to no avail.Have updated to the latest software and this hasnt helped. Any ideas of what to do next - I realy dont fancy the prospect of soldering replacement parts as I hae never soldered before.As this is my first year all boards where new this year so I guess its under warranty - but im in the UK and dont have spare capacity to be able to send it back as the 13 channels which are working are all in use.Any suggestions as to what else i can try to get these 3 channels working appreciated!My boards are all CTB16PC boards.Thanks All!Rob Brown Link to comment Share on other sites More sharing options...
Ponddude Posted November 27, 2009 Share Posted November 27, 2009 Sounds like bad traics. I have them every year. Replace them is 16amp 600volt triacs and you will be fine. If you don't know now to solder, contact support@lightorama.com Link to comment Share on other sites More sharing options...
Recommended Posts