Roger Leon Forbes Posted November 25, 2009 Share Posted November 25, 2009 Have changed controllers with known good one, can find it via the hardware and test it. Problem is when I run my sequences it does not work. It is the last controller in chain, #14. Please help its two arches. Link to comment Share on other sites More sharing options...
Roger Leon Forbes Posted November 25, 2009 Author Share Posted November 25, 2009 Here is what I have found, none of my sequences are sending commands for unit 14, I show them in the sequence they show up on the "View Animation" screen but not dureing run live. I am not sure what to do to fix this, my sequences show 224 channels, 14 units. Any input as to how to fix. roger Link to comment Share on other sites More sharing options...
bisquit476 Posted November 25, 2009 Share Posted November 25, 2009 Have you pulled up the channel property grid in the sequence editor to verify nothing has changed for that controller, assuming you are running LOR2. Link to comment Share on other sites More sharing options...
Roger Leon Forbes Posted November 25, 2009 Author Share Posted November 25, 2009 When I pulled the channel property grid it does not show a controller selected. I chose LOR for the 16 channels and it still will not responed. How can I add this to my sequences ?? Link to comment Share on other sites More sharing options...
Roger Leon Forbes Posted November 25, 2009 Author Share Posted November 25, 2009 We found it, Tom (basis21b on PC) was kind enough to help me and put me on right track, in the channel property grid I had not selected LOR unit as will as the number (0E) and channel numbers. Once that was put in everything is working. Thanks again Tom. Link to comment Share on other sites More sharing options...
Recommended Posts