joejennifer Posted November 18, 2009 Share Posted November 18, 2009 Hardware Utility 2.5.6 can not find my controller. I used this controller last year with no problem. I have 2 controllers and I can find the 1 but not the other one. i currently have only the controller with a problem plug in and I can not find it. Any help would be greatly appreciated. I have been having problems ince halloween.HELP!!! Link to comment Share on other sites More sharing options...
Guest wbottomley Posted November 18, 2009 Share Posted November 18, 2009 joejennifer wrote: Hardware Utility 2.5.6 can not find my controller. I used this controller last year with no problem. I have 2 controllers and I can find the 1 but not the other one. i currently have only the controller with a problem plug in and I can not find it. Any help would be greatly appreciated. I have been having problems ince halloween.HELP!!!Well... first off, do both of them have the same ID?If so, then change one of them to 02.EDIT: if it can't find the problem child, them assign it an ID. Link to comment Share on other sites More sharing options...
joejennifer Posted November 18, 2009 Author Share Posted November 18, 2009 I am not sure how to assign it an ID. When I go to set unit ID, I get an message unable to locate the unit to change ID. Link to comment Share on other sites More sharing options...
-klb- Posted November 18, 2009 Share Posted November 18, 2009 If it is the new controller, I believe you can have only it connected, and use the set new unit ID, where all you set is the desired ID, and it should force the only attached controller to the selected ID. If that gives an error, select ignore errors, try again, then refresh the list.. Link to comment Share on other sites More sharing options...
Recommended Posts