Jump to content
Light-O-Rama Forums

Testing Issue


Robert G.

Recommended Posts

I opened up the Hardware Utility on the LOR control panel and I think I might of accidently clicked a test option. Whenever I plug my LOR in to the outlets, all of the lights flash in order from channel 1 to 16. It will do it about every 3 minutes or so. When I turn my shows on, the lights will be dancing (of course), but in the middle of the sequence they do that testing thing. I also went into hardware utility to try to turn off any testing options, however the testing options are blanked out and I do not see any test option selected. If it's showing that no option is selected and the choices are blanked out, how do I stop/turn it off?

Link to comment
Share on other sites

When I click delete, a pop up says I need to select a unit first. At the top of the window it says Select Unit ID, then under it, it says Comm1 in use and has a Refresh button on the side, then another scroll down box that says Select Unit. There are no choices for Select Unit. Do I click refresh or is it something else I should be looking at?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...