Jump to content
Light-O-Rama Forums

Water damage


Steven

Recommended Posts

On Sunday it rained, and one of my controllers stopped working. At first I thought it was the GFCI, but the garden lights were plugged into the same outlet and they were working.

A closer examination showed that the LED on the controller board was flickering weakly. It also showed that the board was wet! It turns out that I hadn't tightened the enclosure screw all the way, leaving the enclosure open a quarter of an inch which let water in.

I replaced the controller board with a spare and brought the flooded one inside. Fortunately, after a day of drying out, it works fine.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...