Jump to content
Light-O-Rama Forums

Transfering files from one computer to another


Don In Kenner-LA

Recommended Posts

Hi All...
I dont know what iam doing wrong iam trying to copy sequeneces I made on my computer to the computer that will be running my show but when I start the file it says missing media file. I spent alot of time on these sequenes not to be able to use them on my display computer.

Thanks
Don In Kenner,La

Link to comment
Share on other sites

You'll have to copy the media file (such as the MP3 or WAV file) from one computer to the other also.

Depending upon how you have your two computers set up, you may also have to tell LOR on the second computer where to find the media file. So when you get that "missing media file" message, go into the Edit menu, select "Media File" from it, choose the appropriate media file for the sequence, and then save the sequence.

Link to comment
Share on other sites

To fix your issue, you just need to update the media file location for the sequence.

To do this perform the following steps:
1. Make sure the LMS sequence file and your Audio file (wav/mp3/etc. is on the new computer)
2. Open the sequence with Sequence Editor on the new system.
3. Ignore the error message about the audio file.
4. On the menu bar select: Edit -> Media File
5. Navigate to where the audio file is, select it in the dialog and click "Open" button.
6. (Optional) On the menu bar select: View->Wave Form -> (Full Height / Half Height / Off) (Whatever your preference is).

This should restore your audio file link in your sequence file.

Regards,
Howard Shank

(Image is the edit->Media File menu selection)


Attached files 178155=10168-EditMediaFile1.jpg

Link to comment
Share on other sites

Here is the menu item for turning on/off the wave form display.



Attached files 178156=10169-WaveFormDisplay.jpg

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...