Ponddude Posted April 6, 2009 Share Posted April 6, 2009 I was wondering what the difference is between the 08 and the 08D controllers? I know that the D has the ability to control servos, but is that it? Link to comment Share on other sites More sharing options...
Guest wbottomley Posted April 7, 2009 Share Posted April 7, 2009 Greg.... I don't own any of the 8 channel controllers, but, the difference I know between the two are microchips and heat sink.The regular 8's firmware can only be upgraded by LOR sending a preprogrammed chip to replace the old one. The 8D's are similar to the 16D's.Both boards can be purchased with or without heat sink.But then again, I might be wrong in the comparison. Link to comment Share on other sites More sharing options...
Ponddude Posted April 7, 2009 Author Share Posted April 7, 2009 Thanks William.I found this comparison from LOR in their documents folder. The biggest difference is in the chips like you said. Thanks for the info!Here is the link in case anyone wants to compare units.http://lightorama.com/Documents/AC_ControllerMatrix.pdf Link to comment Share on other sites More sharing options...
Recommended Posts