Guest guest Posted May 27, 2006 Share Posted May 27, 2006 Is there a way to get a list print-out of the LOR Sequencer assignments with the associated names? For example, if I rename a channel that is on Unit 2 Channel 1 to Mini Tree, is there anyway that I can print out a list that specifies that information?When I first set up the sequences, I just assigned the channels in order, for example, Mini Tree 1, Mini Tree 2, etc. However, some controllers have channels with lower amperage on them. I would like to switch some around to balance out the amperage on each controller. I was just wondering if I can print out a list when I go to set up a display that I can use to see what is assigned to each.Denny Link to comment Share on other sites More sharing options...
Guest guest Posted May 27, 2006 Share Posted May 27, 2006 If you have Excel/Word, you could "make your own" by putting the lighted objects on one side/column and the channel assignments on the other side...I think it would require a little work, but it would be worth it.Luke K. Link to comment Share on other sites More sharing options...
Recommended Posts