buschy Posted December 6, 2008 Share Posted December 6, 2008 I installed a stand alone sequence in my lor1600 and it plays and I had it to loop 5 times, but after that it does not repeat any more.anything special you have to do to make the seuence repeat as long as the controler is on?thanks Link to comment Share on other sites More sharing options...
Texan78 Posted December 6, 2008 Share Posted December 6, 2008 How long is the sequence and what times do you do have it running in the scheduler? Link to comment Share on other sites More sharing options...
cmoore60 Posted December 6, 2008 Share Posted December 6, 2008 Buschy,I have used standalone when I put up my roof lights. I use a 1 minute animation that does constant fading. This sequence allows me to check that my LEDs are working as I go.I have the sequence with NO loops and just download to the controller, have it set to start when powered on. After it is in the controller, I unplug the controller and plug it in. The thing runs until I unplug the unit, or unload the sequence. I have had this running as describe for hours while installing the lights.Chuck Link to comment Share on other sites More sharing options...
buschy Posted December 6, 2008 Author Share Posted December 6, 2008 I figured this one out too, I was not capping the time on teh sequence. so I think I basically had a never endign sequence with no details.thanks Link to comment Share on other sites More sharing options...
Recommended Posts