Jump to content
Light-O-Rama Forums

DMX moving head only responds to part of my LOR sequence


Recommended Posts

Posted

I have my DMX moving head on the network with my LOR DMX1000 controller. The moving head is performing the pan and tilt commands, but I sequenced the lamp (channel 16) at 100%and the color (channel 1) at 70%  but the lamp does not show any color at all. I put the moving head on auto run to make sure the lamp runs, and it ran through multiple color patterns. Is there something I'm doing wrong?

Posted

Open the pixel console in HU and test each channel with the slider controls.

On all the heads I have seen, channel 1 is usually Pan, but I don't know if it's universal.

Posted

 

21 hours ago, PhilMassey said:

Open the pixel console in HU and test each channel with the slider controls.

On all the heads I have seen, channel 1 is usually Pan, but I don't know if it's universal.

ok thanks will do!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...