Mini Tree 1 comes on when I test mini tree 2 in CP

[SoonerBorn]

And so on when testing in control panel light test.  2 comes on when I test 3 etc.  

Anyone know what I have wrong?  

[Don]

What type of controller are you trying to test?

 

[k6ccc]

Sounds like a mismatch between the preview and the physical channel assignments.

 

[SoonerBorn]

1 hour ago, Don said:

What type of controller are you trying to test?

 

A Pixie 16.  I have 8 mini trees and 8 arches. 

[SoonerBorn]

1 hour ago, k6ccc said:

Sounds like a mismatch between the preview and the physical channel assignments.

 

I have a 16AC channel, mega tree and now adding 8 mini trees and arches.  I run my 16AC and mega tree off network1 and Aux A for my new mini trees and arches. 
 

In my preview my Mini tree 1 is set us as

Aux A unit ID09 which is how I believe it should be from what I’ve read. 
 

[Don]

When you say "2 comes on when I test 3" do you mean the 2nd string comes on? Or the 2nd color (which would normally be green) comes on instead of the normal 3rd color, blue, of the first bulb?

There are quite a few things you can check. Number one, go into the hardware utility, run a scan and make sure you're actually on the address you think you are on.
Second, just do a quick check of the wires and make sure something didn't get into the wrong spot. I don't know if it's all 16, but if it is, then this is *probably* not the issue.
 

You can make the ID any ID number you want it to be. Personally, I would use 10 as the ID. (dipswitch 0001 0000) 0=off.