PixCon 16 status light blinking

[Gmitch]

This is my 4th year using my pixCon 16 for our megatree prop. When testing my show today, all the props in the daisy chain with the pixCon 16 worked properly, however, the PixCon 16 did not light up. I haven't made in changes to the pixCon since setting it up 4 years ago. The manual doesn't give any true troubleshooting. Any advice? Thanks

[k6ccc]

Do you mean that the connected lights don't light up, or no status or power lights on the PixCon16 itself?  If the latter, most likely no power to it.

 

[Gmitch]

Ye

16 minutes ago, k6ccc said:

Do you mean that the connected lights don't light up, or no status or power lights on the PixCon16 itself?  If the latter, most likely no power to it.

 

 

Yes, the connected lights don't light up. The power light is on (solid green), but the status light is blinking red.

[Gmitch]

Problem solved. It was a user error. Realized I set the speed incorrectly. Didn't have it at 500k. Thanks!

 

54 minutes ago, k6ccc said:

Do you mean that the connected lights don't light up, or no status or power lights on the PixCon16 itself?  If the latter, most likely no power to it.