Jump to content
Light-O-Rama Forums

Pixcon16 Network issue. I cannot ping my controller after assigning it an IP.


therielthing

Recommended Posts

Hello,  I have a pixcon16 V1.3 controller.  I have assigned it an IP address many years ago. I am connected to my laptop to the ethernet on the controller  The IP 0.50 my network is the same, but 0.1.  The adapter in the LOR Network configuration is set to my IP. Yet when I go to find my Pixcon. It does not find it.    Ok, no problem, since it has an IP should be able to ping it, but I cannot.   I want to run this controller as an E131 device.     I do this once a year and I can say that I am not as well versed with LOR these days.   Oh.  I am running version 4.2.12 in my sequence editor which I know is dated.  Any help is certainly appreciated.

Link to comment
Share on other sites

Tell us exactly what your IPs are (the entire address for each).  Are there other devices on the network, and if so, what are they?

 

Link to comment
Share on other sites

My Network is 192.168.0.1, 255.255.255.0   My Pixcon16 is 192.168.0.50 (set many years ago)  I have other devices on .51,.52.53 and .54.  Those devices are Falcon controllers, Pixcon from Holiday Coro etc. 

Link to comment
Share on other sites

What is your computer?  Are there any other connections to that network?

 

Link to comment
Share on other sites

There is nothing else connected to that network.    I have a Windows device and not an Apple

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...