James Shelby Posted October 7 Share Posted October 7 We can find all nine controllers with the hardware utility but when running a sequence only a few controllers work but not correctly. Link to comment Share on other sites More sharing options...
TheDucks Posted October 7 Share Posted October 7 HU uses a very slow speed for its functions. (ignores the network speed setting) Are you exceeding the SPEED limitations of older (<=Gen2) Controllers or have set ELOR mode on (some devices do not support ELOR). Link to comment Share on other sites More sharing options...
James Shelby Posted October 7 Author Share Posted October 7 We took my laptop with s4 loaded and everything works now but we need s6 to work. Connected to the laptop that checks our network and controllers. So it tells me it's something in s6 or in the preview. We turned the speed down to the same as s4. S6 will control lights in the hardware utility but not in a sequence with control lights on. Link to comment Share on other sites More sharing options...
James Shelby Posted October 7 Author Share Posted October 7 1 hour ago, TheDucks said: HU uses a very slow speed for its functions. (ignores the network speed setting) Are you exceeding the SPEED limitations of older (<=Gen2) Controllers or have set ELOR mode on (some devices do not support ELOR). Thanks for the help turning off the ELOR looks like a fix. Thanks Link to comment Share on other sites More sharing options...
TheDucks Posted October 7 Share Posted October 7 22 minutes ago, James Shelby said: Thanks for the help turning off the ELOR looks like a fix. Thanks Now is the time to split your networks (those w/ELOR and w/o ELOR devices) or Just get rid of A ELOR roadblock device Link to comment Share on other sites More sharing options...
James Shelby Posted October 7 Author Share Posted October 7 I'm running four networks with over 100 16 Channel controllers the old AC Channel controllers. Link to comment Share on other sites More sharing options...
TheDucks Posted October 7 Share Posted October 7 1 hour ago, James Shelby said: I'm running four networks with over 100 16 Channel controllers the old AC Channel controllers. You got it covered 👍 , just remember the 32 device maximum (the dongle is 1 device) I was thinking you had some newer stuff that needed ELOR, therefore having the split would be a benefit. Link to comment Share on other sites More sharing options...
James Shelby Posted October 7 Author Share Posted October 7 I take up around 3 acres. This is it's 19th season. The most on one network is 34 controllers and the least is 9 controllers. It has worked flawless with versions pre S5/S6. I'm pessimistic moving to S6 was a good move but after this season I'm confident I will change my mind. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now