Serious slowdown with 6.2

[PhilMassey]

I am quite used to waiting a few minutes here and there for motion effects to process, and usually fill in the time by working on a second sequence in another tab while I wait.

Since loading S6 the wait times have increased. I disabled the ME icons  as an obvious suspect, but no change.

I just opened a sequence and It took 9 minutes for the red spinner, top left, to turn into a green check.

Modifying a motion row by extending it 15 seconds and dragging s ramp down caused a 5 minute intensity recalc.

A further adjustment to a 3 second section caused anther 5 minute wait,

At this rate it will be Christmas before I finish updating this sequence.

 

Sequence length is under five minutes, 210 MB size, memory used is about 5 of 16 MB.CPU is less than 20% and GPU is essentially 0. Windows 11. Latest updates and drivers.

Full disclosure, i have just upgraded to two 28 inch 4k monitors.

Reverted to 6.1.10 (uninstall and reinstall)  and the delays are back to what I would consider normal. Loading recalc about 2 mins, and virtually no delay after a small change to a motion row.

Reloaded 6.2 and the slowness returns.

Sequence file is below.

https://www.dropbox.com/s/0ecu080lxj7wj90/TSO Faith Noel 4m32.loredit?dl=0

[MattBrown]

We are aware of the issue and already have a fix ready to go. We will make it available in the next few days.

Thanks for the feedback.

 

[PhilMassey]

Thanks Matt.

What took you so long. 😀

[k6ccc]

Thanks Matt!

 

[PhilMassey]

Looking good in 6.2.2. In fact it feels quicker than 6.1.10 to me.

Many thanks Matt.