Jump to content

Configuring mega tree rgb pixel


tamer_layous
 Share

Recommended Posts

Hello ... 

I have a huge ... tree ... 112strings with 7 controllers ... 

The lights ... cover all the tree 12.5 meter hight From all sides ... 

My question what kind of tree should i choose with seqence editor ( 270 deg or 360 ) 

The back of the tree is half hidden ... 

Almost 300 degrees of the tree is visible it can be seen ... 

What should i choose ... 

 

How do i confgure all 7 controllers ... 

Can i connect regular controllers ( lor ctp) 

Thank you 

 

Link to comment
Share on other sites

Remember that the 270 vs 360 is only for the on screen simulation, but in your case, I would use 270 degree.

The 7 CTB controllers simply are daisy chained on the LOR network and each controller has a different Unit ID.  Presumably you would use sequential numbers - for example 01, 02, 03, 04, 05, 06, 07 or if you already have other controllers in use with those numbers, use higher numbers.  Remembers that LOR Unit IDs count in hex, so for example if you started with Unit ID 06, the rest of the tree would be 07, 08, 09, 0A, 0B, 0C.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...