PhilMassey Posted June 29, 2022 Share Posted June 29, 2022 Win 11 64. S6.0 PRO Currently Connected. One Rs 485 Low Speed on Com 7 As Raw DMX for Moving Heads. One Universe, 160 Channels. One RS 485B Low Speed running LOR DC Controllers. 27 Channels. Two Sandevices 6804 running 2811 Pixels, 8 Universes. Unicast, Separate E1.31 network From the S6 Sequencer everything is working normally. All 6 Heads and two lasers. From the Show player, Scheduled, Live, or On Demand, All the DMX fixtures act as if they are getting scrambled channels and behave in a random manner. I would suspect a channel assignment issue EXCEPT that the same sequence plays normally in Sequencer. All Sequences tested behave the same way. Link to comment Share on other sites More sharing options...
PhilMassey Posted July 6, 2022 Author Share Posted July 6, 2022 Retested in 6.0.2. Problem still exists. . https://www.dropbox.com/s/9ylw4vo73fpook5/20220706_090915.mp4?dl=0 Link to comment Share on other sites More sharing options...
PhilMassey Posted July 8, 2022 Author Share Posted July 8, 2022 Retested in 6.0.4. Problem still exists. Link to comment Share on other sites More sharing options...
MattBrown Posted July 22, 2022 Share Posted July 22, 2022 This issue will be fixed in the next release. The issue wasn't "scrambled channels" but rather that Open DMX was not working properly during show playback. Link to comment Share on other sites More sharing options...
PhilMassey Posted July 22, 2022 Author Share Posted July 22, 2022 Thanks Matt. Much appreciated. I'll also consider the Actidongle. Link to comment Share on other sites More sharing options...
PhilMassey Posted July 26, 2022 Author Share Posted July 26, 2022 Confirm fix to open DMX in 6.0.6 Thanks Matt. . Link to comment Share on other sites More sharing options...
Recommended Posts