Bug Report Moving Head Fixtures Scrambled channels in Show Player. Fine in Sequencer. (Resolved)

[PhilMassey]

Win 11 64.  S6.0 PRO

Currently Connected.

One Rs 485 Low Speed on Com 7 As Raw DMX for Moving Heads. One Universe, 160 Channels.

One RS 485B Low Speed running LOR DC Controllers. 27 Channels.

Two Sandevices 6804 running 2811 Pixels, 8 Universes. Unicast, Separate E1.31 network

 

From the S6  Sequencer everything is working normally. All 6 Heads and two lasers.

From the Show player, Scheduled, Live, or On Demand, All the DMX fixtures act as if they are getting scrambled channels and behave in a random manner. I would suspect a channel assignment issue EXCEPT that the same sequence plays normally in Sequencer. All Sequences tested behave the same way.

 

[PhilMassey]

Retested in 6.0.2. Problem still exists.

.

https://www.dropbox.com/s/9ylw4vo73fpook5/20220706_090915.mp4?dl=0

[PhilMassey]

Retested in 6.0.4. Problem still exists.

[MattBrown]

This issue will be fixed in the next release. The issue wasn't "scrambled channels" but rather that Open DMX was not working properly during show playback.

[PhilMassey]

Thanks Matt. Much appreciated. I'll also consider the Actidongle.

[PhilMassey]

Confirm fix to open DMX in 6.0.6

Thanks Matt.

.