Boscoyo Large 360 MiniTree Coro

[Vince4xmas]

Adding (6) of these trees with topper star.

Tree is 17 pixels on 10 vertical runs = 170 pixels and the top star is 20 pixels (total 190).

Not sure which prop to use in S5 for this type of tree. Up and over?

Please advise.

Thanks

 

[MattBrown]

I would create separate props for the tree and the star. The tree can be a "Tree 360 wedges" shape. If you populated it with 2 strings of 85 pixels each, you would model it as shown in the attached picture.

Matt

 

[Vince4xmas]

Thanks Matt. How would you wire for a "tree 360 wedges"?

Not quite sure on the wiring directions.

Thanks

 

[Jimehc]

I went this route

 

[Vince4xmas]

Thanks Jimehc. I will go with that!

Much appreciated.

[MattBrown]

On 1/16/2022 at 4:35 PM, Vince4xmas said:

Thanks Matt. How would you wire for a "tree 360 wedges"?

Not quite sure on the wiring directions.

Thanks

You can turn on pixel numbers in Preview Design. Then zoom in on the prop to see how the pixel order. See the "Pixel labels" section near the bottom of this help page:

https://www1.lightorama.com/help/design_tab.htm

[Vince4xmas]

Got it now. Thanks.