Help! Other channels flickering for no reason (NO LED'S)

[javerill]

While testing my setup, playing a song in the sequence editor, I noticed several channels stay on after a song has finished. I have also noticed that I don't even have to have the controller selected or anything happening in the hardware setup and I still see lights flicker. I am not using any LED lights.


I have tested my cords and replaced my cat5 cables.

I am using

1) CTB08 Ver 1
4) CTB16PC
1) CTB16D


All controllers have been updated to the newest firmware and I am using LOR 2.0.14.


Any suggestions?

Jim

[cmoore60]

Jim

Is this happening on the same channels or does the channels change?

Have you tried resetting the controllers? I know for the 16D controller you unplug the network, set the dials to 0 0 and power on for about 15 seconds. The unplug, set the unit ID, connect the network and power on. The other controllers I am not sure how you reset them. I think it is a matter of removing the jumper on the header.

Also, you mention version 2.0.14. The present working version of S2 is 2.0.16.

Chuck

[javerill]

Thanks, I will give it a try!

Crazy as it seems it looks like ony the 16D and the 08 are the only ones doing it. I will look to see how to reset the 08 as well.



I will keep you posted.



Jim

[javerill]

I was able to get the controller reset, thank you. But I noticed in my hardware setup an interesting issue.

Has anyone seen this and know how to fix it?

thanks again

Jim


Attached files

[cmoore60]

Jim,

How new are the two PC boards that have the ??

This will not effect operations. The ? have to do with the discovery of the firmware and a file that resides on your computer. Dan explained how this works sometime ago. I think that it is the controller returns the minor version portion when queried. Anyway, you are good to go.

Chuck