CCR prop settings

[Lightnewbie]

Hi all,

 

I have a CTB16PB, two original CCRs with controllers, N2-G4 and standard software level. What are the correct prop settings for the CCRs? I plan to stay in one network and daisy chain them into my ac controller. I’ll post a picture later today with my current settings. So you can tell me what’s wrong haha

[k6ccc]

Not sure what you are asking.  Do you mean the setting for the CCR controllers themselves or the setting in the Preview Editor for the props that will be on those controllers?

 

[Lightnewbie]

Just now, k6ccc said:

Not sure what you are asking.  Do you mean the setting for the CCR controllers themselves or the setting in the Preview Editor for the props that will be on those controllers?

 

I apologize I should have been more specific. I mean the setting in the preview editor for the props that will be on those controllers. 

[k6ccc]

Assign the channels. Nothing special just because it is a CCR.

What prop or props are you planning for the CCR?

 

[Lightnewbie]

I mean what are the settings in the “create prop” window to make sure the prop operates  correctly? I’ve attached an example  it’s not for a CCR. But it’s a reference for the settings I am asking about