Jimehc Posted April 28, 2021 Share Posted April 28, 2021 Just wanted to share with others my idea for mounting pixels to my house outline I purchased the Offset Pixel Mounting Strips from Boscoyo I purchased a Stainless Steel Marine Grade 3/8" Socket Canvas Snaps Kit from Amazon This pair of Heavy-Duty Snap Fastener Pliers made the installation of the Snaps easy.. I attached the Female Snap to the Mounting Strip and Screwed the Male Snap into the Frame around the opening Note: I used 1/2 Grommets to achieve fold-able corners and to connect the strips together - so as to be able to Roll Up my frames at end of season 5 Link to comment Share on other sites More sharing options...
Jimehc Posted April 28, 2021 Author Share Posted April 28, 2021 I thought the picture would of been placed at the end of post or a click to expand type picture - Sorry if not as expected Link to comment Share on other sites More sharing options...
jfuller8400 Posted April 28, 2021 Share Posted April 28, 2021 That is a very cool idea! Link to comment Share on other sites More sharing options...
SeeFromSpace Posted April 28, 2021 Share Posted April 28, 2021 That’s a great idea! Actually those snaps could be used a bunch of different ways. Link to comment Share on other sites More sharing options...
k6ccc Posted April 28, 2021 Share Posted April 28, 2021 Very nice tip. Thanks Link to comment Share on other sites More sharing options...
BluMan Posted April 28, 2021 Share Posted April 28, 2021 Love the idea!! Link to comment Share on other sites More sharing options...
dibblejr Posted April 30, 2021 Share Posted April 30, 2021 Great idea. On one of my props where I needed a corner with the pixel strips all I did was insert the pixel through the two different strips. That was for my window frame test. In the end I ended up using my ws2811 5050 rectangular pixels on pvc, because of ease fo my situation. JR Link to comment Share on other sites More sharing options...
Recommended Posts