Strings of pixels

[Vince4xmas]

Next year I am working on a project that requires props at different locations.

I am using a Pixcon16 controller set at 30% intensity. Pixels are 12vdc.

My path of pixels is as follows:

Pixcon16>12' pigtail>42 pixels@ 4" spacing>3' pigtail>41 pixels @ 4" spacing>3.5' pigtail>37 pixels @ 4" spacing>3.5' pigtail>48 pixels @ 4" spacing. Total 168 pixels.

Will I have any data issues with this run? Or power injection problems? I can use F-amps if needed.

Please advise.

Thanks

 

[k6ccc]

None of your spacings are long enough to cause a problem, and at 30% with 12 volt pixels, you should not need power injection.  However, I would test that prior to setup time.

 

[Vince4xmas]

Thanks much! Will test as I have 6 other locations that require the same setup.

Actually, doing a gazebo in my hometown square downtown. Should be pretty sweet.

Thanks again.