Jack Posted December 4, 2020 Share Posted December 4, 2020 This device has been working fine. What I can tell every one is: -the unit has power as the fan is running and the red led is blinking. I tried a different Cat 5 cable and went direct to the Director and no change in status. I pressed the white test button (S1) and no test pattern. Mr.P had told someone else to power down the unit and move a jumper from 4-5 to 5-6 repower and watch the led, if it flashes faster for how long?? then power down and move the jumper back to 4-5 I DONT know if this info was /is for the same type device. but I looked thru older questions first. Any Help??? Thanks, Jack Link to comment Share on other sites More sharing options...
Mr. P Posted December 4, 2020 Share Posted December 4, 2020 That was to reset a CTB16PCG3. Link to comment Share on other sites More sharing options...
dibblejr Posted December 6, 2020 Share Posted December 6, 2020 If its a pixie16 to reset DO NOT MESS WITH JUMPERS 1- power on 2- push and hold the white button and at the same time have someone unplug the unit 3- continue to hold the button dow and plug the unit back in 4- when the led flashes fast release the button JR Link to comment Share on other sites More sharing options...
Recommended Posts