Box on Rails Posted November 25, 2020 Share Posted November 25, 2020 I have 2 CCP 2 Ver3 in one of my networks and the HU is not able to locate one of the controllers. I put it first in the chain no find it. last no find and by it's self it's not there. The second controller shows up every time. The LED status light flashes one long blink followed by 4 quick blinks. it never goes solid. I tried to trouble shoot with everything I could do. it won't reset. it just keeps blinking that one long and 4 short blinks. Anybody out there had this issue and if so what was the fix? Link to comment Share on other sites More sharing options...
Box on Rails Posted November 25, 2020 Author Share Posted November 25, 2020 Never mind. I found the fix. Link to comment Share on other sites More sharing options...
k6ccc Posted November 25, 2020 Share Posted November 25, 2020 Please post the fix in case someone else reads this with the same problem. Link to comment Share on other sites More sharing options...
Recommended Posts