NitroSS Posted November 21, 2020 Share Posted November 21, 2020 2nd year Newbie here. My computer did not survive the pandemic. Until I can get a new laptop, looks like the only way I can run a show this year is on a SD card thru the mini director. Are there any sites that sell pre-done shows / sequences on an SD card other than the TSO one on LOR’s site? (note: I have singing faces and a pixel tree I wanted to add this year) Link to comment Share on other sites More sharing options...
Don Posted November 21, 2020 Share Posted November 21, 2020 It's something I've considered offering, but never have. Not sure if anyone else out there does. Link to comment Share on other sites More sharing options...
BERTS Posted November 23, 2020 Share Posted November 23, 2020 I am in the same situation I am following this thread to see if anybody responds. I am going to create my own shows and save to an SD card once I figure out how to do that. Link to comment Share on other sites More sharing options...
hasslerk Posted November 23, 2020 Share Posted November 23, 2020 Creating the SD card is the easy part...mapping the "pre-canned" show on the SD card to your controllers and their IDs is the hard part. If you are unable to change your controller IDs (due to a dead computer) to match the SD card show configuration then the show will have to be programmed to match your specific needs, which is a burden on the SD card creator. Usually when you receive a shared sequence file via any means you would open the new sequence in the show editor, accepting the new preview with it, and then map it to the correct controllers in your display (I cut and paste to a new blank sequence). Sorry not better news. To create an SD card you simply use the LOR Hub. I use a G3-MP3 Director for my show execution using both a regular and high speed network, and create a new SD card probably at least once a night (I am always tweaking the show). Link to comment Share on other sites More sharing options...
BERTS Posted November 23, 2020 Share Posted November 23, 2020 Thanks for the reply. The good news is I only have one controller so no mapping required. I will use the LOR Hub and see how it goes. I watched a video on it and it showed how to create on but it didn't show how to add music. I have the sequences and music ready to go just need to burn them to a SD card. Link to comment Share on other sites More sharing options...
NitroSS Posted November 23, 2020 Author Share Posted November 23, 2020 I’m still on hold until I can get a new computer. Link to comment Share on other sites More sharing options...
hasslerk Posted November 23, 2020 Share Posted November 23, 2020 (edited) 1 hour ago, BERTS said: Thanks for the reply. The good news is I only have one controller so no mapping required. I will use the LOR Hub and see how it goes. I watched a video on it and it showed how to create on but it didn't show how to add music. I have the sequences and music ready to go just need to burn them to a SD card. If you need help with that do not hesitate to ask. When you save the sequence in the editor, the audio is associated with it. The LOR HUB will take care of moving everything needed to the card; you do not have to take any separate actions. It will also allow you to set the show times. Edited November 23, 2020 by hasslerk Add more text Link to comment Share on other sites More sharing options...
hasslerk Posted November 23, 2020 Share Posted November 23, 2020 53 minutes ago, NitroSS said: I’m still on hold until I can get a new computer. Hopefully that is soon! Otherwise, can you use a friend's computer for a couple hours? Link to comment Share on other sites More sharing options...
NitroSS Posted November 24, 2020 Author Share Posted November 24, 2020 8 minutes ago, hasslerk said: Hopefully that is soon! Otherwise, can you use a friend's computer for a couple hours? I’m checking all the Black Friday sales Link to comment Share on other sites More sharing options...
Recommended Posts