Paul Masterson Posted October 10, 2020 Share Posted October 10, 2020 (edited) Hi, I am trying to controls my Snow Machine via the DMX-1000 controller. I have read a few items in the forum and tried to replicate the fixes, but to no avail. Here is where I am at: LOR version: 4.4.6 HU: Set iDMX-1000 to E1 (read that the default E0 if Legacy and the recommendation was to more to some other ID In the Test Console, if I move channel three above 128, the snow machine turns on Success (or so I thought) SE Regular network, enhanced COM3 Add an LOR controller, set the UNIT ID to E1, Channel to 3 Set intensity ON for this (and all 16 channels in E0) and nothing I went back, set it to E0, Test Console in DMX (channel 3) turns on the snow machine. Added a device (iDMX 1000), selected channel 3 and still nothing. Not sure what is wrong, test console has everything working well but SE is triggering nothing. PC LOR version: 4.4.6 Pro COM3, Enhanced USB485B Idmx-1000 3 pin DMX cables (in and out connected) Snowmachine Edited October 10, 2020 by Paul Masterson Link to comment Share on other sites More sharing options...
Paul Masterson Posted October 11, 2020 Author Share Posted October 11, 2020 Issue closed. Beats me what happened but I guess waiting 24 hours, some sleep and wishing away bad LOR-voodoo was all that was needed to have it work. :) Link to comment Share on other sites More sharing options...
Recommended Posts