Jump to content

Firmware update question


Recommended Posts

I have a few controllers (all gen 3) that I would like to update the firmware.  A few have dedicated on/off only channels for things that won't dim.  IF I upgrade the firmware will that wipe the on/off only setting?  Easy enough to redo again, just curious before I head to the workshop.

Link to comment
Share on other sites

  • 2 months later...

What is the version of Firmware you need to run a Pixie 16 daisy chained with 3 Gen 3 controllers?  Right now only my pixie 16 is working, no regular controllers are running the other lights.

Thanks!

Link to comment
Share on other sites

Confirm that you are running a 500K Enhanced LOR network?  I don't know what firmware version it is, but if the AC controllers are more than a couple years old, that is likely the issue.  Firmware update one to whatever the current version is.  If that takes care of it, update the other two.

Note that your LOR install includes all the firmware files, however if you are running 5.3.10, as your profile states, that may not be the latest.  It should be new enough.  However you can also manually download from:  http://www1.lightorama.com/firmware-updates/

 

Link to comment
Share on other sites

Just an update for you...I did update the firmware on all the controllers and BAM!  It works like a champ!  I did update the network to run the 500k Enhanced network.

I updated from firmware 1.06 to 1.11 with no problems...

Thanks!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...